Audi Folks

General chat that fellow COM'ers may be interested in.
Post Reply
jimmacsrx7
Speed Setter
Speed Setter
Posts: 102
Joined: Wed Oct 26, 2005 6:47 pm
Location: Upton MA

Audi Folks

Post by jimmacsrx7 » Wed Oct 26, 2005 8:03 pm

Hi, Just wondering if any of you out there are familiar with Audi's? I am thinking of getting my wife a 99-00 A-6 wagon awd and would like to know any common problems to look for, thanks for any help in advance. Jim

offcamber09
Speed Racer
Speed Racer
Posts: 1014
Joined: Wed Jun 01, 2005 6:44 pm
Location: East Kingston, NH
Contact:

Audis

Post by offcamber09 » Thu Oct 27, 2005 9:39 pm

James, I haven't owned an Audi since my 1980 5000 turbo- but at my shop we have seen plenty of mid to late 90s A4/A6/Passat with incredibly noisey ball joints. They creek something fierce when you turn the wheel. I believe there was a recall (silent or otherwise ?). Be aware that there are 2 upper and 2 lower balljoints/control arms at each front corner...For you Miata drivers that's a total of 8 front ball joints #-o
Scott Rosnick
#09 BMW 318ti-6

WillM
Administrator
Administrator
Posts: 1453
Joined: Mon Oct 06, 2003 10:14 pm

Post by WillM » Thu Oct 27, 2005 10:16 pm

Yup, the ball joints can get noisey. I've only had to replace one so far, on my 2000 A4 w/ 110k miles. Rear wheel bearings are a 'maintenance item' and are toast every 60k or so. The 3.0L cars are underpowered. Go with the 2.7T or 4.2, if you can.

Quattro AWD is excellent, and has kept me in the Audi camp for a while.
96 Miata #72 SC
PRA 4 :sunny:

jimmacsrx7
Speed Setter
Speed Setter
Posts: 102
Joined: Wed Oct 26, 2005 6:47 pm
Location: Upton MA

Audi

Post by jimmacsrx7 » Sat Oct 29, 2005 7:33 pm

Thanks a lot guys, yeah the owner said he had the whlo front end just done. I will have to see the work order. Thanks for the heads up.... Jim 93 rx7tt #074 SPA

JackFFR1846
Speed Setter
Speed Setter
Posts: 187
Joined: Tue Oct 18, 2005 12:56 pm
Location: Hopkinton, MA

Post by JackFFR1846 » Wed Nov 02, 2005 1:15 pm

Money pit!

I had a 98 A4 2.8QTR and the tranny went at 49k. Power steering about 40k. Rear wheel bearing 55k.

Then a 2000 S4. Tranny input seal at 25k. I bought it used and dumped it at that point since the warantee was just ending. Dropping a quattro tranny and re-installing is a 15 hour job. I loved the car but they are expensive to run and do break down in expensive ways.

No more Audis for me, ever!

jack

Post Reply

Who is online

Users browsing this forum: Semrush [Bot] and 1 guest