I need some tire advice.

General chat that fellow COM'ers may be interested in.
Post Reply
TroyV
Administrator
Administrator
Posts: 1522
Joined: Thu Jan 12, 2006 3:02 pm
Location: Salem, NH
Contact:

I need some tire advice.

Post by TroyV » Fri Mar 30, 2007 9:18 am

I have a set of some old v710’s mounted… and I have a set of brand new A3S05 hoosiers mounted. The Hoosiers are specifically intended to run autox at Fort Devens. My plan was to take both sets to NHIS and run about 5 minutes of the first session on the Hoosiers to cycle them in for Devens duty, then come in and swap to the v710’s and run the rest of the day. Do you think it will be productive to cycle them or should I just sit on them and run them at Devens un-cycled? I guess I’m asking if NHIS even for a short time period is too damaging for the A compound Hoosiers?
Troy Velazquez
#5 T50

User avatar
DanDarcy
Speed Racer
Speed Racer
Posts: 764
Joined: Mon Jun 27, 2005 9:59 am
Location: Belchertown, Mass.

Post by DanDarcy » Fri Mar 30, 2007 9:38 am

Troy-- I'd keep the Hoosiers just for the auto-x, especialy with a heavy car like the Mustang. One lap at NHIS will get them too warm. I had enough trouble with the "R" series lasting on my Mustang.
Dan D'Arcy
Lotus Exige Cup Car #069 SU
Lotus Elise #310 SD
Chevron B64 Formula SU
http://www.allpowersales.com/

Georgethefierce
Speed Setter
Speed Setter
Posts: 190
Joined: Fri Sep 02, 2005 10:34 am

Post by Georgethefierce » Fri Mar 30, 2007 9:54 am

those 710's wont last long on a heavy car on the track either!

GTF scrubs his tires in on the street :P
J
07 IT7
Angrypork.com
84 RX-7

TroyV
Administrator
Administrator
Posts: 1522
Joined: Thu Jan 12, 2006 3:02 pm
Location: Salem, NH
Contact:

Post by TroyV » Fri Mar 30, 2007 10:02 am

I guess I don't drive particularly hard.. I get lots of life from V710s.. :)
Troy Velazquez
#5 T50

User avatar
Dave_G
Speed Racer
Speed Racer
Posts: 301
Joined: Mon Mar 27, 2006 3:05 pm
Location: Vermont

Re: I need some tire advice.

Post by Dave_G » Fri Mar 30, 2007 10:41 am

TroyV wrote:Do you think it will be productive to cycle them or should I just sit on them and run them at Devens un-cycled?
From everything I've been told, it's definitely a good idea to heat cycle them before using them in an autocross. However, I agree that NHIS is probably not the best environment for doing so. Like GTF, I've heat-cycled my new 710s on the road. (However, I live in the boonies, and it's pretty easy to do so.)

User avatar
DanDarcy
Speed Racer
Speed Racer
Posts: 764
Joined: Mon Jun 27, 2005 9:59 am
Location: Belchertown, Mass.

Post by DanDarcy » Fri Mar 30, 2007 12:03 pm

I've run the Hooshiers R3s04 and R3S05 s with and and without heat cycling them. They seem to last about the same time. I've even had the Tire Rack heat cycle them, still no better life. A nose heavy Mustang just eats up tires :shock:
I'm sure your car weights almost as much as mine , 3720# with 1/2 fuel and no driver. One or two laps at NHIS might be ok with the cold track and all but I'd still use them just at Devens
Dan D'Arcy
Lotus Exige Cup Car #069 SU
Lotus Elise #310 SD
Chevron B64 Formula SU
http://www.allpowersales.com/

tmak26b
Speed Setter
Speed Setter
Posts: 112
Joined: Tue Dec 12, 2006 11:48 pm

Post by tmak26b » Fri Mar 30, 2007 12:46 pm

My 710 was scary fast for 5 events. After the first 5 events, they are slower than my worn RA-1s. I think I got a total of 50 passes on them at autox, i didnt even try them at the track because I know they will last one day.

offcamber09
Speed Racer
Speed Racer
Posts: 1014
Joined: Wed Jun 01, 2005 6:44 pm
Location: East Kingston, NH
Contact:

Post by offcamber09 » Fri Mar 30, 2007 9:44 pm

TroyV wrote:I guess I don't drive particularly hard.. I get lots of life from V710s.. :)
I drive as hard as anyone and I won the SPA championship on 1 set of 710s in 2005. They are actually great time trial tires because they heat up so fast on a heavy car. I agree that they fall off fairly quickly, but I found them to settle in and be pretty consistent thereafter.
Scott Rosnick
#09 BMW 318ti-6

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest