Thoughts on driving on R compounds to the track
Thoughts on driving on R compounds to the track
Guys:
What are your thoughts on mounting my R compounds (v710s) at home and driving on them to NHIS? The purpose of this would be to save time at the track and avoid a repeat of the problem I had at Tremblant where I ended up missing the registration deadline and getting in trouble with Mark
The total drive would be 90 miles on the highway.
Or is a better solution just to wake up earlier and learn to swap tires more quickly?
thanks,
Brad
What are your thoughts on mounting my R compounds (v710s) at home and driving on them to NHIS? The purpose of this would be to save time at the track and avoid a repeat of the problem I had at Tremblant where I ended up missing the registration deadline and getting in trouble with Mark
The total drive would be 90 miles on the highway.
Or is a better solution just to wake up earlier and learn to swap tires more quickly?
thanks,
Brad
If you do not HAVE to drive on the r-compounds, then I wouldn't. The last thing you'll want is to have a tire problem on the way to the track which would prevent you from running for the day.
That said, I drive on my 'rain' tires (full tread) and tow my dry tires on a small trailer. Other than the threat of getting a flat, using up good rubber, and generating unnecessary heat cycles, there is nothing wrong with driving the r-compounds on the street. If the weather is bad (rain, cold, etc.), then highway/street driving can get a little dicey. The problem is even worse if the tires are at race-depth.
On the way home from Tremblant, one of my rear tires blew out. I would have preferred to blow out a street tire as opposed to one I use on track. Oh well - at least the most important tires were on the trailer.
In general, I'd say don' t do it. How long does a tire swap take you? Mine are done in 15 minutes, if I take my time.
That said, I drive on my 'rain' tires (full tread) and tow my dry tires on a small trailer. Other than the threat of getting a flat, using up good rubber, and generating unnecessary heat cycles, there is nothing wrong with driving the r-compounds on the street. If the weather is bad (rain, cold, etc.), then highway/street driving can get a little dicey. The problem is even worse if the tires are at race-depth.
On the way home from Tremblant, one of my rear tires blew out. I would have preferred to blow out a street tire as opposed to one I use on track. Oh well - at least the most important tires were on the trailer.
In general, I'd say don' t do it. How long does a tire swap take you? Mine are done in 15 minutes, if I take my time.
96 Miata #72 SC
PRA 4
PRA 4
re: Thoughts on driving on R compounds to the track
Don't do it. For one, if you get pulled over, you'll get a ticket (even thought their DOT tires), because the tread level is bound to be below the legal limit. Secondly, if you pick up a nail/screw, you're probably gonna have to chuck the tire, whereas a street tire you can get plugged.
--Michael
ST4 Miata #176
--Michael
ST4 Miata #176
-
- Speed Setter
- Posts: 190
- Joined: Fri Sep 02, 2005 10:34 am
Having taken my dad's 94 Supra Twin Turbo in BFG R1's through the median strip of I-89 on the way back from Tremblant a few years ago, I would only reccommend it if there is sufficient tread on the tires, or there is zero threat of rain.
Kevin Foote
#64 SB Nissan 350Z
1998-2003 Chief of Tech
1998-2002 BOD member
SSB Track Record Holder at LRP
#64 SB Nissan 350Z
1998-2003 Chief of Tech
1998-2002 BOD member
SSB Track Record Holder at LRP
-
- Speed Setter
- Posts: 187
- Joined: Tue Oct 18, 2005 12:56 pm
- Location: Hopkinton, MA
Brad,
Lotsa help is available at the track to do a swapover. I'll help. It takes me maybe 15 minutes to unload my car off the trailer and get the tech sticker. I've run track tires on the street long ago. They are sticky enough that the front tires pick up every screw and nail on the road and pitch them at the rears. The rears catch them. Not a good thing.
You're my victim.....uh......I mean student Saturday.
jack
Lotsa help is available at the track to do a swapover. I'll help. It takes me maybe 15 minutes to unload my car off the trailer and get the tech sticker. I've run track tires on the street long ago. They are sticky enough that the front tires pick up every screw and nail on the road and pitch them at the rears. The rears catch them. Not a good thing.
You're my victim.....uh......I mean student Saturday.
jack
JackFFR1846 wrote:Brad,
Lotsa help is available at the track to do a swapover. I'll help. It takes me maybe 15 minutes to unload my car off the trailer and get the tech sticker. I've run track tires on the street long ago. They are sticky enough that the front tires pick up every screw and nail on the road and pitch them at the rears. The rears catch them. Not a good thing.
You're my victim.....uh......I mean student Saturday.
jack
Cool. I'll look for you. I'll be in the White RSX Type S.
-
- Speed Racer
- Posts: 1014
- Joined: Wed Jun 01, 2005 6:44 pm
- Location: East Kingston, NH
- Contact:
Re: re: Thoughts on driving on R compounds to the track
"street tire you can get plugged."
I know I sound like a broken record, but please don't bother getting tires plugged. If you do you might as well try and find some bias ply tires and really laugh in the face of technology. PATCHES ONLY (yes I'm yelling).
I know I sound like a broken record, but please don't bother getting tires plugged. If you do you might as well try and find some bias ply tires and really laugh in the face of technology. PATCHES ONLY (yes I'm yelling).
Scott Rosnick
#09 BMW 318ti-6
#09 BMW 318ti-6
-
- Fast Lapper
- Posts: 49
- Joined: Sat Nov 02, 2002 8:41 pm
-
- Speed Racer
- Posts: 1014
- Joined: Wed Jun 01, 2005 6:44 pm
- Location: East Kingston, NH
- Contact:
16.5 tires on 16" rims
I have a huge dent in the corrogated steel roof of my shop (20' high) from a tire blowing off the rim as a moron former tire changer tried just that. Would have killed him if he was leaning over the tire.
Chris, got to love those bias snows- especially when you use studs that are too long for the the stud holes.
Chris, got to love those bias snows- especially when you use studs that are too long for the the stud holes.
Scott Rosnick
#09 BMW 318ti-6
#09 BMW 318ti-6
Who is online
Users browsing this forum: No registered users and 1 guest