Gotta ask...

General chat that fellow COM'ers may be interested in.
therooster
Fast Lapper
Fast Lapper
Posts: 49
Joined: Sat Nov 02, 2002 8:41 pm

Post by therooster » Tue Aug 15, 2006 9:28 pm

"Ugh. The current process is flawed. Period. Improve it and we can spend less time defending its integrity. "

Before you say the current process is flawed spend some time learning it, working within the system and everything involved, then make suggestions to improve.

"Simple example already discussed...an obvious typo such as the 1:20 v. 1:29 would never make it through if the prelim result were published. For that matter, I have yet to hear what is involved in the existing procedure of checks and balances."

There is a checks and balance. At least when I was involved, Timing and Scoring had a redundant system to prevent timing errors. I find it hard to believe that this error went unnoticed. There is as I recall both electronic and hand written timing results that are cross checked. Given what I know about the timing system and how it works I tend to agree with Will that it was an error on how it was read vs anything else. I was not there and have not spoken to anyone so I could be wrong

"Pretty lengthy reading, much to take in...particularly for noobies. "

I can not believe this statement. Noobies especially should be reading the rules and be clear on what is allowed and what is not. When I was Chief of Event Operations I always toyed with suggesting that people would have to pass a test and work an event before driving. Ignorance is not an excuse. In my opinion if you do not know the rules do not play the game.

offcamber09
Speed Racer
Speed Racer
Posts: 1014
Joined: Wed Jun 01, 2005 6:44 pm
Location: East Kingston, NH
Contact:

Post by offcamber09 » Tue Aug 15, 2006 10:26 pm

The heck with timing and scoring- I want to know how you guys paste multiple quotes in your replies.

BTW if the post is very long-winded, maybe you guys could use chapters to break it up. That way I know where to start when I get back from the bathroom.
Scott Rosnick
#09 BMW 318ti-6

User avatar
rajito
Speed Racer
Speed Racer
Posts: 595
Joined: Thu Dec 18, 2003 11:33 pm

Post by rajito » Wed Aug 16, 2006 1:18 am

offcamber09 wrote:BTW if the post is very long-winded, maybe you guys could use chapters to break it up. That way I know where to start when I get back from the bathroom.
Scott, I just use a Sharpie to put a little line on my screen to remember where I left off.

Raj
#66 SuperSlowGT
Silver 2004 Nissan 350Z

Seven

Post by Seven » Wed Aug 16, 2006 8:57 am

therooster wrote:Before you say the current process is flawed spend some time learning it, working within the system and everything involved, then make suggestions to improve.
That was/is my goal. I'm just getting a little tired of defending my intent.
therooster wrote:Given what I know about the timing system and how it works I tend to agree with Will that it was an error on how it was read vs anything else. I was not there and have not spoken to anyone so I could be wrong


If uncertain, why comment?
therooster wrote:I can not believe this statement. Noobies especially should be reading the rules and be clear on what is allowed and what is not. When I was Chief of Event Operations I always toyed with suggesting that people would have to pass a test and work an event before driving. Ignorance is not an excuse. In my opinion if you do not know the rules do not play the game.
Again, point missed. I'm done on this topic.

As far as quotes.... when you reply to a post highlight some text of the original post and hit the "quote" button. You'll see the highlighted text in the reply box precedded by "[quote=("user name of the poster") followed by a closed bracket. This indicates the beginning of the quoted text. The end of the quoted text is followed by "/quote" within brackets. Just use the preceding and ending indicators where ever you'd like to quote some text. Sorry, not exactly clear but hope it helps.

Jeff Iafrati
SPA 224

WillM
Administrator
Administrator
Posts: 1453
Joined: Mon Oct 06, 2003 10:14 pm

Post by WillM » Wed Aug 16, 2006 10:54 am

RyanC wrote:Will,
just a clarification, but the wrong time from the last NHIS event was NOT misread, nor were the trophies correctly awarded. The printout had a typo whereupon the 9 and 0 were transposed. As badly as our names get mangled (just call me Coochie!), this was not an error made by the guys reading off the results. It wasn't until after the event that the mistake was noticed/corrected.
Coochie, thanks for the clarification. :D
Either we are talking about two different incidents, or I did not hear the whole back story. Sorry for any confusion.

Jeff,
No need to apologize. We're just having discussions here. :) I do not mean to offend or put anyone off with my posts, and I read everyone else's posts with the same objective in mind. Forum posts sometimes leave too much room for the reader's interpretations, and I know that sometimes the intent behind my posts (as well as a chuckle here and there) aren't interpreted that way.

All of the insight I have into the world of COMSCC T&S has been from listening to Dan during monthly meetings. Since Dan is not a frequent poster here, I offered up the info I had to share. I suggest you come to the meeting, inquire about it, and be prepared to share your thoughts on why instantaneous availability of results would benefit the membership. If you cannot make it to the meeting, I will raise the question on your behalf (hey, its my job!). :)

My initial reaction to your request is that "live results" will create more work and require more help. While I cannot speak for anyone else, I would think it is safe to say that I am not alone in this thought. With this in mind, my friendly advice is to learn more about the process (which I appreciate you are trying to do) and determine if you can offer a stream-lined solution.

Unfortunately, we do not have an over abundance of volunteer staff. It is not uncommon for several of our volunteer staff to get very restricted track time, even though they are paying to attend the events. While the volunteers aren't complaining, I know this bothers the Prez, and I agree with him 100%.

Just a quick word about the many people that help to keep COM together: From what I've seen, the volunteers aren't looking for praise, though an occasional "thank you" is always warmly accepted. :) I assume most are like myself. We are just trying to give back to the club that has given us so much. Paying it forward, if you will. Plenty of us enjoy our involvement with the club, and it's not like we don't have any fun. :) In many ways, we are just a large group of friends with common interests.

I hope that I have not offended anyone by drifting the conversation back toward volunteer help!

Here's looking forward to a constructive meeting tonight!

Cheers,

Will
96 Miata #72 SC
PRA 4 :sunny:

WillM
Administrator
Administrator
Posts: 1453
Joined: Mon Oct 06, 2003 10:14 pm

Post by WillM » Wed Aug 16, 2006 11:01 am

rajito wrote:
offcamber09 wrote:BTW if the post is very long-winded, maybe you guys could use chapters to break it up. That way I know where to start when I get back from the bathroom.
Scott, I just use a Sharpie to put a little line on my screen to remember where I left off.

Raj
Scott, two words: Laptop computer. :lol:

Raj, :lol: :lol: :lol: :lol:

Mark, have you ever written comedy for British TV? Finally, you post more than a one-word response, but it turns out to be a cut & paste from the COM website. The master strikes again!
96 Miata #72 SC
PRA 4 :sunny:

Seven

Post by Seven » Wed Aug 16, 2006 11:04 am

Thanks Will... I'm relieved you feel this way. Hope to see you this evening.

Jeff

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest