1990 Mustang*** SOLD*** spares available

THE place to sell it, buy it, or give it away.
Post Reply
offcamber09
Speed Racer
Speed Racer
Posts: 1014
Joined: Wed Jun 01, 2005 6:44 pm
Location: East Kingston, NH
Contact:

1990 Mustang*** SOLD*** spares available

Post by offcamber09 » Sat Sep 01, 2012 3:36 pm

THE CAR IS SOLD, but there are spares available- Scott C. has first dibs on rims/tires.


This is the black #09 car with the oil leak that I can not find. I have over $30,000 in reciepts for this car- thankfully mostly spent by the original owner- and a grand total of 2 or so hours on track. I have been frustrated with this car for the last time. Maybe someone smarter than I can figure it out. The power, handling and brakes are fantastic. The car is cross weighted and aligned for a 210# driver. Just get it to not catch on fire and you have a great car.

331 stroker motor- DSS forged pistons, twisted wedge heads, Anderson Ford Cam, 1.6 roller rockers, DSS support girdle and windage tray, Canton road-race pan
Tremec 3550 5 speed- new Cenetrforce Dual Friction clutch
Torsen T2R rear differential with 3.55 gears
Aluminum driveshaft
Maximum Motorsports suspension: panhard bar, torque arm, camber plates- too much to list.
Bilstein coil overs
Brembo 4 piston 13” front brakes. Hawk DT70 front pads Hawk Blue rear pads.
Aeromotive fuel system. 15 gallon fuel cell.
Dyno sheet from 8/18/12: 339 rwhp 371 rwtq.
Lots of spares: rims, tires, exhaust etc.
Reciepts and build documentation provided.

$5,000 Scott 978-609-5590.
THIS IS NOT A STREET CAR
Last edited by offcamber09 on Sat Sep 08, 2012 1:54 pm, edited 2 times in total.
Scott Rosnick
#09 BMW 318ti-6

CP
Speed Racer
Speed Racer
Posts: 524
Joined: Tue Dec 04, 2007 1:19 pm
Location: West Simsbury, CT

Re: 1990 Mustang

Post by CP » Sun Sep 02, 2012 11:01 pm

Dan Darcy needs to buy this car! Wait, does it still have AC and a sound system?
-Cy
99 Spec Miata (SM/STU/STL/EP)
2011, 2013, 2014 NER STU Champion

User avatar
DanDarcy
Speed Racer
Speed Racer
Posts: 764
Joined: Mon Jun 27, 2005 9:59 am
Location: Belchertown, Mass.

Re: 1990 Mustang

Post by DanDarcy » Mon Sep 03, 2012 8:53 am

TOO MUCH POWER for me Cy, remember I'm an old man who just putts around in a 1.8 liter Toyota powered plastic play toy. :D

Scott -- I hope you plan on buying something else and coming out and play with COM :(
Dan D'Arcy
Lotus Exige Cup Car #069 SU
Lotus Elise #310 SD
Chevron B64 Formula SU
http://www.allpowersales.com/

User avatar
Shawn624
Speed Racer
Speed Racer
Posts: 243
Joined: Sat Nov 25, 2006 10:23 pm

Re: 1990 Mustang

Post by Shawn624 » Mon Sep 03, 2012 6:16 pm

Scott, are the rumors true? Are you finally coming around to the miata crew? That's Great!
Shawn Sweeney
97ish Miata #99
http://www.SweeneyLawGroupLLC.com

offcamber09
Speed Racer
Speed Racer
Posts: 1014
Joined: Wed Jun 01, 2005 6:44 pm
Location: East Kingston, NH
Contact:

Re: 1990 Mustang

Post by offcamber09 » Tue Sep 04, 2012 5:11 pm

Still haven't given in to the hysteria- as much as they make sense- of driving a Miata. I have a BMW 318ti that has been begging to go racing. That's probably next- although there are Mustang forces at work on me still.
Scott Rosnick
#09 BMW 318ti-6

User avatar
StephanAlfa
Speed Racer
Speed Racer
Posts: 1646
Joined: Tue Jun 27, 2006 6:01 am
Location: Merrimack, NH

Re: 1990 Mustang

Post by StephanAlfa » Tue Sep 04, 2012 8:52 pm

offcamber09 wrote:Still haven't given in to the hysteria- as much as they make sense- of driving a Miata. I have a BMW 318ti that has been begging to go racing. That's probably next- although there are Mustang forces at work on me still.
You know my vote! When not an Alfa, always a non-Miata! :D
Stephan de Pénasse - Classroom Instructor - http://www.comscc.org
2001 BMW 330i Sports Package (T-60 Class)

sdcham1
Rookie Racer
Rookie Racer
Posts: 67
Joined: Wed Jan 25, 2006 9:31 pm
Location: Millis MA

Re: 1990 Mustang

Post by sdcham1 » Sat Sep 08, 2012 10:52 am

Ok if you start to part it out I will take the spare wheels,Torsen T2R,maybe the tremec, let me know when you ready and I will help you strip it.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests