st3 classifaction

Questions, comments, and discussions concerning COMSCC rules.

Moderators: Boondocker850, blindsidefive0

Post Reply
geoffm
Rookie Racer
Rookie Racer
Posts: 74
Joined: Sat Aug 29, 2009 10:11 am

st3 classifaction

Post by geoffm » Fri Feb 04, 2011 12:20 pm

i have a subaru impreza with a 2.2 that blue up and i was wondering if i used a stock 2.5 motor with everything else stock also would this be the class i would be in? or could i run in ssb? bolth motors are from the same year car

Mark Swinehart
Speed Racer
Speed Racer
Posts: 911
Joined: Wed Oct 23, 2002 2:31 pm

Re: st3 classifaction

Post by Mark Swinehart » Fri Feb 04, 2011 6:04 pm

SPC = Street Prepared C

geoffm
Rookie Racer
Rookie Racer
Posts: 74
Joined: Sat Aug 29, 2009 10:11 am

Re: st3 classifaction

Post by geoffm » Fri Feb 04, 2011 6:23 pm

ok so rebuilding my 2.2 would be more advisable. so i can be in a class that im competive in, due to my limited budget

WillM
Administrator
Administrator
Posts: 1453
Joined: Mon Oct 06, 2003 10:14 pm

Re: st3 classifaction

Post by WillM » Fri Feb 04, 2011 6:32 pm

Yes Geoff, that is correct.

Unfortunately, the 2.2 to 2.5L swap would put you into SPC. Stick with the 2.2 and dominate SSC!
96 Miata #72 SC
PRA 4 :sunny:

geoffm
Rookie Racer
Rookie Racer
Posts: 74
Joined: Sat Aug 29, 2009 10:11 am

Re: st3 classifaction

Post by geoffm » Fri Feb 04, 2011 6:51 pm

ok thanks now time to tear this motor apart and get some pistions. so do you have to run cats in ssc beacuse bolth on this car are full of oil,fuel,and carbon due to one of the ring lands breaking and sending all the oil out the tail pipe,

geoffm
Rookie Racer
Rookie Racer
Posts: 74
Joined: Sat Aug 29, 2009 10:11 am

Re: st3 classifaction

Post by geoffm » Fri Feb 04, 2011 6:53 pm

never mind just read it you have to run cats,can you run universal cats? the oe ones are $1600 for bolth from subaru and 600 for bolth from some place online but a universal is 100 o yea i have a 97 subaru impreza

User avatar
chaos4NH
Moderator
Moderator
Posts: 1894
Joined: Wed Oct 11, 2006 8:58 pm
Location: NH

Re: st3 classifaction

Post by chaos4NH » Sat Feb 12, 2011 9:33 am

From ST rules:

Aftermarket headers may be used. Muffler use is required, but type is unrestricted. Exhaust must exit behind rear
wheels and outside the body. Exhaust tubing size is unrestricted. Catalytic converters must be used in cars originally
equipped with them. Non-stock replacement of the catalytic converter is allowed.
Sam
Chief of Operations

#41 Nissan 200SX SER T40

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest