Thanks!
- breakaway500
- Speed Racer
- Posts: 2663
- Joined: Wed Aug 29, 2007 8:47 am
- Location: In my shop,usually.
Thanks!
Thanks to all for having such a well run enthusiasts car club.Best I have ever experienced.
Thanks for listening and answering questions.Even though you're busy learning as well.
Thanks for helping me with com protocol.I can tell you where my log book is right now. :whip:
Thanks to all the instructors and staff. Talk about a tough job!
Special thanks to Les,Joe and Lou.You guys put me on line. :salute:
..and thanks Troy. You were right, this is good stuff!
Thanks for listening and answering questions.Even though you're busy learning as well.
Thanks for helping me with com protocol.I can tell you where my log book is right now. :whip:
Thanks to all the instructors and staff. Talk about a tough job!
Special thanks to Les,Joe and Lou.You guys put me on line. :salute:
..and thanks Troy. You were right, this is good stuff!
It's not what you drive, it's how you drive. "Lap times matter"
Hey! It is fun for us also!
I see you getting a little closer to the Grocery Getter times, still out to be the quickest FWD? I hope so, there have been little to no competitiors in my class, so you and Mike G have given me goals to shoot for:
Catch Mike G and stay ahead of you!
Great fun!
I see you getting a little closer to the Grocery Getter times, still out to be the quickest FWD? I hope so, there have been little to no competitiors in my class, so you and Mike G have given me goals to shoot for:
Catch Mike G and stay ahead of you!
Great fun!
Sam
Chief of Operations
#41 Nissan 200SX SER T40
Chief of Operations
#41 Nissan 200SX SER T40
Hey Sam at the open track after time trials at Mosport, Mark and I were playing cat and mouse and his times got into the 1:41s Pretty quick for FWD.
Dan D'Arcy
Lotus Exige Cup Car #069 SU
Lotus Elise #310 SD
Chevron B64 Formula SU
http://www.allpowersales.com/
Lotus Exige Cup Car #069 SU
Lotus Elise #310 SD
Chevron B64 Formula SU
http://www.allpowersales.com/
- breakaway500
- Speed Racer
- Posts: 2663
- Joined: Wed Aug 29, 2007 8:47 am
- Location: In my shop,usually.
Sam,does this mean the GG is coming out of retirement?
I have some plans for the little Focus.I was going to do some surgery on it,but I have had so much fun in that car,I just can't. I may deglass it and take a few more pounds out here and there,but the roof is staying.Might even get my HP motor installed. Who knew the stock one would hold up so well? Maybe some suspension work too.
Now that I have my COM license (yea!) I am planning on using the Atom.
Subjecting an instructor to the Atom and my driving would have been asking too much, in my opinion.
See you all at NHMS3!
I have some plans for the little Focus.I was going to do some surgery on it,but I have had so much fun in that car,I just can't. I may deglass it and take a few more pounds out here and there,but the roof is staying.Might even get my HP motor installed. Who knew the stock one would hold up so well? Maybe some suspension work too.
Now that I have my COM license (yea!) I am planning on using the Atom.
Subjecting an instructor to the Atom and my driving would have been asking too much, in my opinion.
See you all at NHMS3!
It's not what you drive, it's how you drive. "Lap times matter"
Mark, you have come a very long way in a relatively short amount of time....at least since I have known you.
Congrats on getting signed off for your TT license. History shows that it has not taken very long for any of our core autox group to obtain a TT license with COM. You, Greg S, Dave P, Mike S, Yatesy, me etc...and I'm sure that list will continue to grow.
Congrats on getting signed off for your TT license. History shows that it has not taken very long for any of our core autox group to obtain a TT license with COM. You, Greg S, Dave P, Mike S, Yatesy, me etc...and I'm sure that list will continue to grow.
Troy Velazquez
#5 T50
#5 T50
\DanDarcy wrote:Hey Sam at the open track after time trials at Mosport, Mark and I were playing cat and mouse and his times got into the 1:41s Pretty quick for FWD.
Ooooooh boy, that is good! My personal target in the GG was to be 1:40 this year (down from 1:43.7 last year) with the new suspension.
From the sounds of it, Mark is going to go all out with mods on the Focus, so I expect big things from that car!
Mark, yes, the GG is going to be running again. It will remain my DD, but I have too much fun and $$$$$ in it to spend more $$$$ on another car.
Ran into a slight glitch this weekend. Pulled the front wheel bearing and hub, but couldn't install the new bearing because the steering knuckle bearing seat was .065" out of round, New knuckle and hub to arrive by Wednesday and if installed in time I will do the Thursday test day at NHMS.
Sam
Chief of Operations
#41 Nissan 200SX SER T40
Chief of Operations
#41 Nissan 200SX SER T40
Hey Mark, thought you would get a kick out of this Hot Rod article. This is what sold me on the GLHS when I was a kid. "For a FWD, I love it!"DanDarcy wrote:Hey Sam at the open track after time trials at Mosport, Mark and I were playing cat and mouse and his times got into the 1:41s Pretty quick for FWD.
http://www.front-runners.net/mopar_stuf ... gt350.html
- breakaway500
- Speed Racer
- Posts: 2663
- Joined: Wed Aug 29, 2007 8:47 am
- Location: In my shop,usually.
Congrats on the license Mark! I still find your quote funny when I asked you when the Atom would make it to HPDE:breakaway500 wrote: Now that I have my COM license (yea!) I am planning on using the Atom.
Subjecting an instructor to the Atom and my driving would have been asking too much, in my opinion.
See you all at NHMS3!
"You don't bring an F-16 to get your pilots license!".
I had Lou as an instructor at my first event in my Scion tC, enjoyed the day very much. Glad to hear you had a similar experience.
I'll be up at NHIS hanging out I think, I'll keep an eye open for the focus and say hello.
Paul G.
Paul G.
#12
#12
Mark, I used to cook my brakes too until I changed wheels. The stock wheels fully enclose the brakes so that no air gets to them. My brakes are stock with pads and stainless lines, that's it.
Paul, see you at NHMS. After driving your Scion, which was excellent on the track BTW, I have a whole new respect for them. Now you just need that TRD SC kit.
Paul, see you at NHMS. After driving your Scion, which was excellent on the track BTW, I have a whole new respect for them. Now you just need that TRD SC kit.
Thanks Lou, I'll look for you in the pits.lou m wrote:Mark, I used to cook my brakes too until I changed wheels. The stock wheels fully enclose the brakes so that no air gets to them. My brakes are stock with pads and stainless lines, that's it.
Paul, see you at NHMS. After driving your Scion, which was excellent on the track BTW, I have a whole new respect for them. Now you just need that TRD SC kit.
After enjoying the day with you I decided to buy a 2nd car for track (went with a Miata); spent a year prep'ing the car with safety requirements, etc.; did July NHMS 2-days; sold the Scion to free up some cash; totaled the miata leaving work a week after that (some old guy pulled out in front of me), and now have a stock miata and am starting all over!
Hence no events for me in Oct/November; but looking forward to coming out and hanging with everyone, and getting ready for next year.
Paul G.
Paul G.
#12
#12
Who is online
Users browsing this forum: Bing [Bot] and 1 guest