work is slow !
-
- Speed Racer
- Posts: 911
- Joined: Wed Oct 23, 2002 2:31 pm
Re: work is slow !
David -
Don't bother detailing it, but please do get it tuned since it hasn't had the HP since the hit.
I'll be down to get it this afternoon or can you just have it delivered to Concord?
Remember the cost isn't a factor.
Don't bother detailing it, but please do get it tuned since it hasn't had the HP since the hit.
I'll be down to get it this afternoon or can you just have it delivered to Concord?
Remember the cost isn't a factor.
-
- Speed Racer
- Posts: 1338
- Joined: Tue Aug 26, 2008 5:53 pm
- Location: hamden ct.
Re: work is slow !
are you sure about the detailing ???? it's only 200 dollars and the car would take a good shine after it's all buffed out with 2 coats of wax . the simonizing kit is only 75 dollars more .that would be the best way to go and i will only charge the cost for of the kit ! so the grand total would only be 275.00 dollars for the detailing .
-
- Speed Racer
- Posts: 911
- Joined: Wed Oct 23, 2002 2:31 pm
Re: work is slow !
Since it is only $275 go ahead and do it.
Are you going to hand letter the class and numbers since they were removed when you painted the car?
Are you going to hand letter the class and numbers since they were removed when you painted the car?
-
- Speed Racer
- Posts: 1338
- Joined: Tue Aug 26, 2008 5:53 pm
- Location: hamden ct.
Re: work is slow !
you wanted the number done to ? ok will do .
Re: work is slow !
Jeeez Mark, had I known you were going for a concourse automobile, I would have unloaded both barrels of double 0 buck into the trunk lid!
Sam
Chief of Operations
#41 Nissan 200SX SER T40
Chief of Operations
#41 Nissan 200SX SER T40
Re: work is slow !
Great job at a fantastic price! Thanks Dave!
Not bad for a nine year old truck, right?
-Carl
Not bad for a nine year old truck, right?
-Carl
- breakaway500
- Speed Racer
- Posts: 2663
- Joined: Wed Aug 29, 2007 8:47 am
- Location: In my shop,usually.
-
- Speed Racer
- Posts: 1338
- Joined: Tue Aug 26, 2008 5:53 pm
- Location: hamden ct.
Re: work is slow !
thanks carl ! the truck did come out good . friday when it was sitting outside the birds had a fieldday on it . i had to wash it again to get all the bird crap off it .
mark no theres no flames . i was thinking of airbrushing carl green porsche 913b on the tailgate with flames coming out the exhaust pipe.
mark no theres no flames . i was thinking of airbrushing carl green porsche 913b on the tailgate with flames coming out the exhaust pipe.
Re: work is slow !
Just so we know, what exactly did you do to the truck? (detail, Paint, both?)
Paul G.
#12
#12
Re: work is slow !
I have no "before" pictures. It's a 2002 with 100,000 miles. I picked it up (used, obviously) three weeks ago and immediately delivered it to Dave. I asked if he could make it look like new.
Dave repaired a dent on the right rear side panel, outside the bed area.
He repainted the right rear, and repainted both front fenders which had failed paint.
He also touched up the rear bumper and gate, and then performed a full detail.
This is the second job I've had him do, he repaired a minor rust issue on my RX8 two years ago, something I wanted to do before it got out of hand. The repair and paint match was excellent. I'll be bringing over my Porsche soon for a new front air dam/ spoiler.
-Carl
Dave repaired a dent on the right rear side panel, outside the bed area.
He repainted the right rear, and repainted both front fenders which had failed paint.
He also touched up the rear bumper and gate, and then performed a full detail.
This is the second job I've had him do, he repaired a minor rust issue on my RX8 two years ago, something I wanted to do before it got out of hand. The repair and paint match was excellent. I'll be bringing over my Porsche soon for a new front air dam/ spoiler.
-Carl
Re: work is slow !
Thanks Carl. The truck does look great.
Dave, I can't do anything this winter (car in storage already); but where is your shop? I'll introduce myself and show you my car at a future event sometime. - Paul G.
Dave, I can't do anything this winter (car in storage already); but where is your shop? I'll introduce myself and show you my car at a future event sometime. - Paul G.
Paul G.
#12
#12
-
- Speed Racer
- Posts: 1338
- Joined: Tue Aug 26, 2008 5:53 pm
- Location: hamden ct.
Re: work is slow !
my shop is in hamden ct . it's right off I-91 . i tend to give racers a big price brake and do the little extra for them .
-
- Speed Racer
- Posts: 911
- Joined: Wed Oct 23, 2002 2:31 pm
Re: work is slow !
David –
Great news to hear that you and your friend got the roll cage in the car.
I guess your ingenious idea of freezing the cage (with dry ice) and heating the car with hot water worked.
Great news to hear that you and your friend got the roll cage in the car.
I guess your ingenious idea of freezing the cage (with dry ice) and heating the car with hot water worked.
Who is online
Users browsing this forum: Google [Bot] and 1 guest