BMW E30 and E36 race parts
Posted: Wed Oct 02, 2013 2:49 pm
I have decided to finally start parting out my stalled PA / SPA project. Most of the parts are new in the box. I will entertain reasonable offers but I'm not in a huge rush. All the parts are located in Hampstead, NH. I can do Paypal and shipping on most of the small stuff or cash and in person pick up. I will update this post as I add new things and things are sold.
E36, E46 JB Racing Ultra-Light Racing Clutch/Flywheel Assembly - $900
Never used Ultra-Light race clutch for E36. This particular part is branded as MPD it is the same as the JB racing / Turner clutch. This is brand new never used. For more information see:
http://www.turnermotorsport.com/p-4066- ... embly.aspx
http://www.jbracing.com/flywheel-bmwul1.php
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
BMW E36 M50 turbo motor , unassembled – More information coming I still need to go through what I have for this. Contact me if you are interested.
Venolia low compression pistons, bored and honed block, head with new valve job. Exhaust manifold, turbo, intercooler, and ducting.
E30 4-dr chassis w/ welded in roll cage - $500
Cage is halo style. The left rear quarter was replaced and remains unfinished in the area of the wheelwell. The sound deadening has been scrapped off. The rear doors are gutted. I believe I have all the glass except for the windshield. No taillights. I have the trunklid, hood and doors that are not shown in the pictures.
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
Ground Control:
GC Foam bump stops - $10
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
Powerflex poly rear trailing arm bushings (Fixed, Race) E30 PFR5-306B - $70
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
Solid Aluminum rear subframe mounts E30 - $50
I can't remember if I got these from Ireland Eng. Or Ground Control
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
E36, E46 JB Racing Ultra-Light Racing Clutch/Flywheel Assembly - $900
Never used Ultra-Light race clutch for E36. This particular part is branded as MPD it is the same as the JB racing / Turner clutch. This is brand new never used. For more information see:
http://www.turnermotorsport.com/p-4066- ... embly.aspx
http://www.jbracing.com/flywheel-bmwul1.php
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
BMW E36 M50 turbo motor , unassembled – More information coming I still need to go through what I have for this. Contact me if you are interested.
Venolia low compression pistons, bored and honed block, head with new valve job. Exhaust manifold, turbo, intercooler, and ducting.
E30 4-dr chassis w/ welded in roll cage - $500
Cage is halo style. The left rear quarter was replaced and remains unfinished in the area of the wheelwell. The sound deadening has been scrapped off. The rear doors are gutted. I believe I have all the glass except for the windshield. No taillights. I have the trunklid, hood and doors that are not shown in the pictures.
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
Ground Control:
GC Foam bump stops - $10
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
Powerflex poly rear trailing arm bushings (Fixed, Race) E30 PFR5-306B - $70
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
Solid Aluminum rear subframe mounts E30 - $50
I can't remember if I got these from Ireland Eng. Or Ground Control
Images:
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing
https://docs.google.com/file/d/0B4-OVeh ... sp=sharing