Insterest in dyno day on March 24th at our shop?

agrabau · Post by **agrabau** » Thu Mar 08, 2007 7:24 am

Mike, great! We met about a month ago right? Good to hear from you.

Alex

mhiggins · Post by **mhiggins** » Thu Mar 08, 2007 10:38 pm

Hi Alex,
Would it be aright to do one pull open headers and one through the mufflers? I donâ€™t want to pee off your neighbors around the shop. Iâ€™m trying out a new exhaust system this year. Tired of shooting the super traps at the corner workers and peeling them off every time I put the car on the trailer.

Mike #270 Mustang cobra

Shawn624 · Post by **Shawn624** » Fri Mar 09, 2007 12:04 am

I'm pretty flexible that day so just give me a time and I'll be there.

agrabau · Post by **agrabau** » Fri Mar 09, 2007 7:31 am

Mike, that's fine with us. We're working on a relatively soundproof room which may or may not be done by then. Either way it's not a problem. The neighbors will love it.

Shawn, sounds good. I'll get the schedule done in a few days.

agrabau · Post by **agrabau** » Tue Mar 20, 2007 12:51 pm

Hi everyone, I wanted to post a quick schedule in advance so we can work on getting everyone in and out on schedule. If we start at like 9:30 how does this look?

1-2)Mike Higgins Mustangs (2) 10am.
3)Shawn Sweeney Mustang GT 11:30
4)Sam- Mazda Speed 3 11-3pm slot sometime
5)Fred Ferguson- COM Miata
6) Tom Cannon- COM Mustang
7) Joel Adams- Trans AM

-Alex

mhiggins · Post by **mhiggins** » Tue Mar 20, 2007 2:16 pm

Hi Alex,
Make that one Mustang, with strait headers. I havenâ€™t received all the parts for my new system yet. If I do I donâ€™t know if I can get it in on time. I can supply earplugs.

Thanks Mike

Post by **chaos4NH** » Tue Mar 20, 2007 7:59 pm

That is great Alex. See you around 930-1000.

jadams · Post by **jadams** » Wed Mar 21, 2007 12:25 pm

I am going to have to cancel out on this. Something has come up and I am not able to make it. So you can either fill my slot with someone else, or just have more time for each person on the list.

Sorry,

Joel

mhiggins · Post by **mhiggins** » Wed Mar 21, 2007 4:19 pm

Hi Alex, Could you put me in for sometime after 1:00?

Mike

agrabau · Post by **agrabau** » Wed Mar 21, 2007 4:55 pm

1)Fred Ferguson- bmw e30 m3
2)Shawn Sweeney Mustang GT 11:30
3)Sam- Mazda Speed 3 11-3pm slot sometime
4)Fred Ferguson- COM Miata
5) Tom Cannon- COM Mustang
6)Mike Higgins Mustang around 1pm

agrabau · Post by **agrabau** » Fri Mar 23, 2007 8:07 pm

See everyone tomorrow!

Shop phone-781-551-3399

Address 61 Endicott St (in a complex at the very end of the street) through yellow gate, stay right, down small hill on right.

Norwood MA 02062

Shawn624 · Post by **Shawn624** » Sat Mar 24, 2007 5:18 pm

Guys,

That was Great!!! I ended up with a ton more horsepower after an hour on the dyno and some minor adjustments. It's hard to get that kind of horsepower for that much money.

I'll have to get the Mustang down there next.

Post by **chaos4NH** » Sat Mar 24, 2007 7:58 pm

Hey Shawn (and you knew this was coming!!), you better keep that special tool a secret! Wouldn't want other RX7 tuners to know about your magic hammer and pliers(Darn, gave it away, huh?)

Thanks to Alex, Bill and Matt who made my first dyno visit very informative and rewarding. These guys know their stuff!

agrabau · Post by **agrabau** » Sat Mar 24, 2007 9:15 pm

What a great day. It was really nice meeting you guys.

Shawn had an innovative way to wring extra horses out of the RX- a hammer and a pry bar.

We're going to secure your kill switch for you too btw!!!

Sam's car made really crazy power in stock form. We later had a Yamaha R1 motorcycle on the dyno, completely stock and it made 161 whp, a mini cooper 1275cc blasting down 55whp, then a Porsche Cayman made 240.

Shawn624 · Post by **Shawn624** » Sun Mar 25, 2007 10:17 am

Pry bar, duct tape, hammer and pliers - I could never figure out what all those other tools were used for.

COM Sports Car Club

Insterest in dyno day on March 24th at our shop?

COM Dyno Day at DSG

Who is online