Any and all discussions concerning events.
-
paultg
- Speed Racer
- Posts: 1182
- Joined: Wed May 24, 2006 9:28 pm
Post
by paultg » Mon Nov 10, 2008 8:08 pm
nhsilversti wrote: shut off HD, for some reason it only shows 2 seconds of HD video.
my TT laps from the 2nd and yes, my car was handeling like crap.
Ted, you need to buy a wide angle lens so we can see your hands more!
Was your last lap the best of the group? (it looked pretty good to me).
I enjoy watching all the videos, keep them coming!
Paul G.
Paul G.
#12
-
mossaidis
- Speed Racer
- Posts: 352
- Joined: Tue Aug 02, 2005 11:53 pm
- Location: Milan, Italy
Post
by mossaidis » Tue Nov 11, 2008 12:26 am
nhsilversti wrote:
some in-car video from saturday group 1 session 1, yes i get black flagged
Amazing... some of us just don't understand AWD and turbo all in a full sized car. It's like you hit the warp speed button in the straight aways and bam! the chase came to an end. Thanks for sharing!
(ok time for an engine swap, turbo and a conversation to AWD for the little civic)
2008 Porsche GT2 RS Baden-Württemberg Special Edition (800 whp)
-
chaos4NH
- Moderator
- Posts: 1894
- Joined: Wed Oct 11, 2006 8:58 pm
- Location: NH
Post
by chaos4NH » Tue Nov 11, 2008 2:58 pm
nhsilversti wrote: shut off HD, for some reason it only shows 2 seconds of HD video.
my TT laps from the 2nd and yes, my car was handeling like crap.
AWD, 500 hp and you drove the snot out of that thing! 1:16.995 good for 3d fastest time of the day!
Sam
Chief of Operations
#41 Nissan 200SX SER T40
-
nhsilversti
- Speed Setter
- Posts: 192
- Joined: Thu Jun 14, 2007 10:38 pm
- Location: southern NH
Post
by nhsilversti » Tue Nov 11, 2008 11:49 pm
thanks for comments guys. just wait until next year, fresh tires, more aero and no more power. i will only be using ra-1's for practice tires, im planning on a set of v710's for TT tire
need parts for your trailer, welding repairs/fabrication (sorry cant do aluminum), tires mounted and balanced, feel free to email/pm me. i am located a little west of nashua. ted
-
breakaway500
- Speed Racer
- Posts: 2663
- Joined: Wed Aug 29, 2007 8:47 am
- Location: In my shop,usually.
Post
by breakaway500 » Wed Nov 12, 2008 9:21 am
You'll love the V710's! Does your car really make 500hp?
It's not what you drive, it's how you drive. "Lap times matter"
-
cuda6666
- Speed Racer
- Posts: 540
- Joined: Wed Feb 22, 2006 11:54 am
Post
by cuda6666 » Wed Nov 12, 2008 9:40 am
nhsilversti wrote:thanks for comments guys. just wait until next year, fresh tires, more aero and no more power. i will only be using ra-1's for practice tires, im planning on a set of v710's for TT tire
I think slicks and a "PB" class designation would be just the ticket.
Subaru Legacy GT #67
"Track time is my enemy"
- Frank Perron
"I remember when sex was safe and racing was dangerous."
-
nhsilversti
- Speed Setter
- Posts: 192
- Joined: Thu Jun 14, 2007 10:38 pm
- Location: southern NH
Post
by nhsilversti » Wed Nov 12, 2008 10:12 am
breakaway500 wrote:You'll love the V710's! Does your car really make 500hp?
its in the ballpark of 450-500 at the crank, WHP should be around 400-420ish
-
RyanC
- Speed Setter
- Posts: 147
- Joined: Tue Jul 05, 2005 4:56 pm
Post
by RyanC » Tue Nov 18, 2008 4:43 pm
StephanAlfa wrote:Hi Ryan:
Too bad for the outer CV but nice "exit".
I noticed your hands are all over the place. Wonder if maintaining them steady at 9 and 3 or 10 and 2 position will help you focus on driving. Also pulling down on the steering as opposed to pushing up will help you steer.
My classroom students could have told you that
And thanks for staying ahead of the Miatas is SPC
Yeah my hands were a little busy; a combination of things. Partially, especially exiting 12, I was encountering a severe pull to the right due to the failing CV. It was difficult keeping the car out of the wall on the right side. Also, the car has a bit of play in the steering, and the steering is quite slow. Not quite as apparent in the video as it is while driving, is that I'm making quite a few minor adjustments due to the car sliding around a bit. But, I appreciate the feedback nonetheless. If you have some time next season, maybe I can take you out with me for some fine tuning?
-
RyanC
- Speed Setter
- Posts: 147
- Joined: Tue Jul 05, 2005 4:56 pm
Post
by RyanC » Tue Nov 18, 2008 4:44 pm
boltonite wrote:That 2nd lap was close to perfect ... for the low line, maybe it *is* faster.
Thanks! I prefer the low line in pretty much every car I drive as I can brake a bit later, plus the transition is a little smoother I think.
-
nhsilversti
- Speed Setter
- Posts: 192
- Joined: Thu Jun 14, 2007 10:38 pm
- Location: southern NH
Post
by nhsilversti » Tue Nov 18, 2008 7:13 pm
this weekend i figured out why the car didnt handle so well....
1 very well corded front tire the other front was right at that point where you can see the cord thru the rubber.
need parts for your trailer, welding repairs/fabrication (sorry cant do aluminum), tires mounted and balanced, feel free to email/pm me. i am located a little west of nashua. ted
-
zip4zat
- Speed Racer
- Posts: 236
- Joined: Sun Oct 09, 2005 7:31 pm
Post
by zip4zat » Tue Nov 18, 2008 8:49 pm
nhsilversti wrote:this weekend i figured out why the car didnt handle so well....
1 very well corded front tire the other front was right at that point where you can see the cord thru the rubber.
Welcome to my world
Joe Lu
#24 ST1 STi
-
CP
- Speed Racer
- Posts: 524
- Joined: Tue Dec 04, 2007 1:19 pm
- Location: West Simsbury, CT
Post
by CP » Thu Jan 08, 2009 11:10 pm
-Cy
99 Spec Miata (SM/STU/STL/EP)
2011, 2013, 2014 NER STU Champion
Who is online
Users browsing this forum: Google [Bot] and 1 guest