T50 roll call

General chat that fellow COM'ers may be interested in.
Post Reply
jeffw
Moderator
Moderator
Posts: 913
Joined: Wed Oct 18, 2006 12:51 am
Location: Wilmington, MA

T50 roll call

Post by jeffw » Sun Mar 24, 2013 5:31 pm

Are you running in T50 this year? I am, and I'd love to know who else is planning on it.
Jeff Wasilko
On the Track: 1995 Miata #08
To the Track: 2007 Volvo 780
On the Street: 2017 Volvo V60 Polestar

Dtangard
Speed Racer
Speed Racer
Posts: 351
Joined: Mon Jul 05, 2010 9:26 pm
Location: Groton, MA

Re: T50 roll call

Post by Dtangard » Sun Mar 24, 2013 6:28 pm

I am
Derek
#01 T40
1995 Miata

dtlemoine
Speed Racer
Speed Racer
Posts: 408
Joined: Mon Oct 26, 2009 7:01 pm

Re: T50 roll call

Post by dtlemoine » Mon Mar 25, 2013 10:36 am

I'll be rocking T50.
Dave

E36 328is | SD #14

User avatar
wizzman
Speed Racer
Speed Racer
Posts: 374
Joined: Mon Apr 25, 2011 1:06 pm
Location: Westford, MA
Contact:

Re: T50 roll call

Post by wizzman » Mon Mar 25, 2013 11:57 am

I plan to run in T50 as much as the wife and new baby will permit!
-Dave W.

1994 Mazda Miata T50 #56

imgon
Speed Setter
Speed Setter
Posts: 118
Joined: Tue Feb 05, 2008 7:50 pm
Location: Plymouth, MA

Re: T50 roll call

Post by imgon » Tue Mar 26, 2013 5:36 pm

I'm in T50 unless I get rid of my SM6's and go to a lesser tire, then I can sqeak into T40. Doubtful I'll go that route as I have become used to how these tires behave, don't want to start the learning curve over. Beginning to re-assemble the car, rebuilt engine and trans joined together and ready to drop in car, then off to the body shop, hope to have it ready to drive in a few weeks.
Chuck

'87 Mazda RX7
#714
T-50

TroyV
Administrator
Administrator
Posts: 1519
Joined: Thu Jan 12, 2006 3:02 pm
Location: Salem, NH
Contact:

Re: T50 roll call

Post by TroyV » Wed Mar 27, 2013 9:19 am

After my latest trip to the dyno two weeks ago. :( ....my car fits in low T40 on nittos and mid T40 on Hoosiers. I guess the 20k track miles I put on that engine have taken a toll.

I'm torn. I feel like I want to drive in T50, but based on my power output and the fact that my car is 2466 with driver, I likely won't make much of a dent. Tires and balls doesn't really cut it any more. :)
Troy Velazquez
#5 T50

User avatar
StephanAlfa
Speed Racer
Speed Racer
Posts: 1646
Joined: Tue Jun 27, 2006 6:01 am
Location: Merrimack, NH

Re: T50 roll call

Post by StephanAlfa » Wed Mar 27, 2013 9:30 am

I will run in T50 class ... :sunny:

Clean and Competitive should be the motto. :idea:

Should be interesting with former ST-4 and SSB combo with power vs cornering in mixed tracks configs everything else being held equal. 8)

I am coming in with "power and weight" quite different from my Alfa days where I was light but no power :shock:
Stephan de Pénasse - Classroom Instructor - http://www.comscc.org
2001 BMW 330i Sports Package (T-60 Class)

jeffw
Moderator
Moderator
Posts: 913
Joined: Wed Oct 18, 2006 12:51 am
Location: Wilmington, MA

Re: T50 roll call

Post by jeffw » Thu Mar 28, 2013 10:17 am

TroyV wrote:I feel like I want to drive in T50, but based on my power output and the fact that my car is 2466 with driver, I likely won't make much of a dent. Tires and balls doesn't really cut it any more. :)
I'm on the heavy side as well....2470 pounds at 3/4 tank of gas. Also had street tires and wheels on so I"m probably heaver than that with the real tires/wheels on.
Jeff Wasilko
On the Track: 1995 Miata #08
To the Track: 2007 Volvo 780
On the Street: 2017 Volvo V60 Polestar

Bobc
Speed Racer
Speed Racer
Posts: 244
Joined: Wed Oct 12, 2011 1:31 pm

Re: T50 roll call

Post by Bobc » Thu Mar 28, 2013 2:30 pm

Not to jack this thread but OMG at 2466# or 2470# you guys are almost 1k under my weight race ready damn my z is a tank........

dinoracer
Speed Racer
Speed Racer
Posts: 748
Joined: Fri Oct 07, 2005 11:05 pm
Location: Hudson NH

Re: T50 roll call

Post by dinoracer » Fri Mar 29, 2013 7:47 pm

I'm bringing it to T50 also, bitches. :twisted:
Tom Cannon

Former COM Chief Steward (fka Chief of Operations, Chief of Tech, assistant BBQ cook, Club Secretary....I been around a while)
#26 - 2000 Black Miata (sold) - co-driver of the orange 318ti .. thanks Scott!

User avatar
wizzman
Speed Racer
Speed Racer
Posts: 374
Joined: Mon Apr 25, 2011 1:06 pm
Location: Westford, MA
Contact:

Re: T50 roll call

Post by wizzman » Fri Mar 29, 2013 9:33 pm

dinoracer wrote:I'm bringing it to T50 also, bitches. :twisted:
You've been waiting for this for awhile :wink:
-Dave W.

1994 Mazda Miata T50 #56

jeffw
Moderator
Moderator
Posts: 913
Joined: Wed Oct 18, 2006 12:51 am
Location: Wilmington, MA

Re: T50 roll call

Post by jeffw » Mon Apr 01, 2013 2:20 pm

StephanAlfa wrote:I will run in T50 class ... :sunny:

Clean and Competitive should be the motto. :idea:

Should be interesting with former ST-4 and SSB combo with power vs cornering in mixed tracks configs everything else being held equal. 8)

I am coming in with "power and weight" quite different from my Alfa days where I was light but no power :shock:
I dunno. Looked at some of your lap times from last year :-)
Jeff Wasilko
On the Track: 1995 Miata #08
To the Track: 2007 Volvo 780
On the Street: 2017 Volvo V60 Polestar

6PAK72
Speed Racer
Speed Racer
Posts: 765
Joined: Sat Nov 29, 2008 11:30 am
Location: Wilton NH

Re: T50 roll call

Post by 6PAK72 » Wed Apr 03, 2013 2:08 pm

#42 made it to T50 with SM6.
Jeff Baker
Wilton, NH
#42 95 Miata
72 TR6
79 TR7 V6 in shed

Andre
Rookie Driver
Rookie Driver
Posts: 14
Joined: Thu Jul 26, 2012 10:41 am
Location: Nashua NH

Re: T50 roll call

Post by Andre » Fri Apr 12, 2013 4:27 pm

I should run once or twice in t50 later this year.

I still need: LSD, shorter gearing, and stickier tires. (at <50 points right now)

Was off a few tenths from ST4 last year, so you guys better step it up :)
2015 Mustang GT #910

TroyV
Administrator
Administrator
Posts: 1519
Joined: Thu Jan 12, 2006 3:02 pm
Location: Salem, NH
Contact:

Re: T50 roll call

Post by TroyV » Fri Apr 12, 2013 5:25 pm

I'm moving to T40. :)
Troy Velazquez
#5 T50

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest