Swaybar question

Questions, comments, and discussions concerning COMSCC rules.

Moderators: Boondocker850, blindsidefive0

Post Reply
JC_MS3
Rookie Driver
Rookie Driver
Posts: 6
Joined: Thu Jul 30, 2009 12:43 pm

Swaybar question

Post by JC_MS3 » Thu Jul 30, 2009 12:47 pm

I'm new to COM, and after reading the rule book wasn't entirely sure: is an aftermarket FRONT sway bar allowed in SS category? The rules don't address it either way, and SCCA allows it for stock, hence my question.

User avatar
cfossum
Speed Racer
Speed Racer
Posts: 529
Joined: Wed Jul 13, 2005 4:45 pm
Location: CT

Re: Swaybar question

Post by cfossum » Thu Jul 30, 2009 1:16 pm

No!
Any suspension mods move you to ST. With COM, stock means stock.
-Carl

JC_MS3
Rookie Driver
Rookie Driver
Posts: 6
Joined: Thu Jul 30, 2009 12:43 pm

Re: Swaybar question

Post by JC_MS3 » Thu Jul 30, 2009 2:30 pm

cfossum wrote:No!
Any suspension mods move you to ST. With COM, stock means stock.
-Carl
Except, it would seem, for braided stainless brake lines: COM seems to allow for stock, SCCA doesn't....

User avatar
cfossum
Speed Racer
Speed Racer
Posts: 529
Joined: Wed Jul 13, 2005 4:45 pm
Location: CT

Re: Swaybar question

Post by cfossum » Thu Jul 30, 2009 2:36 pm

Interesting observation! My best guess is that brake lines could be considered a wear item?? Other wear items are ok too, like pads, tires. Hmm, but not bushings. Good catch! Anyhow, different sway bars will certainly make your car handle differently, and could give you an advantage over a stock car. SS rules list available mods. If it isn't specifically mentioned, it isn't allowed.
-Carl

JC_MS3
Rookie Driver
Rookie Driver
Posts: 6
Joined: Thu Jul 30, 2009 12:43 pm

Re: Swaybar question

Post by JC_MS3 » Thu Jul 30, 2009 3:36 pm

cfossum wrote:If it isn't specifically mentioned, it isn't allowed.
-Carl
That's what I'll use for guidance - thanks. Based on this I may just keep my Mazdaspeed3 in SSA and wait on the swaybar.

JC

6PAK72
Speed Racer
Speed Racer
Posts: 765
Joined: Sat Nov 29, 2008 11:30 am
Location: Wilton NH

Re: Swaybar question

Post by 6PAK72 » Mon Aug 03, 2009 7:51 pm

After breaking lose on 2A, I'm going the other way and adding the sway bars. And yes, I went in too hot.

The R-compound tires without good swaybar balance is not a smart idea. Ask Will who was behind me...it could not have been pretty.
Jeff Baker
Wilton, NH
#42 95 Miata
72 TR6
79 TR7 V6 in shed

User avatar
chaos4NH
Moderator
Moderator
Posts: 1894
Joined: Wed Oct 11, 2006 8:58 pm
Location: NH

Re: Swaybar question

Post by chaos4NH » Tue Aug 04, 2009 9:27 pm

JC_MS3 wrote:
cfossum wrote:If it isn't specifically mentioned, it isn't allowed.
-Carl
That's what I'll use for guidance - thanks. Based on this I may just keep my Mazdaspeed3 in SSA and wait on the swaybar.

JC
The stock MS3 front sway bar is an excellent match to the stock suspension. I would not mess with it unless going to coilovers. From experience of 3 years running the Speed 3 with COM.
Keep in mind that any air intake change (other than a drop in Filter) will move you to ST2.
Sam
Chief of Operations

#41 Nissan 200SX SER T40

therooster
Fast Lapper
Fast Lapper
Posts: 49
Joined: Sat Nov 02, 2002 8:41 pm

Re: Swaybar question

Post by therooster » Tue Aug 04, 2009 9:48 pm

The braided brake line is from when the Ford Mustang Cobra first came out. There was an issue on that car that needed to be addressed. The replacement braided brake line was the answer. I forget why all of SS got the allowance, I guess it was to be fair to all.

Chris A.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest