Palmer has open lapping 6/3

General chat that fellow COM'ers may be interested in.
Post Reply
n1gzd
Speed Racer
Speed Racer
Posts: 483
Joined: Sat May 28, 2011 8:48 pm
Location: Acton, MA

Palmer has open lapping 6/3

Post by n1gzd » Tue May 17, 2016 9:40 pm

Day before our 2 day event.
Rebecca

User avatar
breakaway500
Speed Racer
Speed Racer
Posts: 2663
Joined: Wed Aug 29, 2007 8:47 am
Location: In my shop,usually.

Re: Palmer has open lapping 6/3

Post by breakaway500 » Wed May 18, 2016 6:43 am

Those events are much too crowded. Last week, I could barely squeeze by the other three drivers on track :lol: and managed to wear my tires down to the steels belts... :shock: (shame on me)
The new curbing is nice and the garages are up. Water is on as well. Hoping to be there this Friday.

Whiskey Hill is Heaven on Earth.. 8) :sunny:
It's not what you drive, it's how you drive. "Lap times matter"

n1gzd
Speed Racer
Speed Racer
Posts: 483
Joined: Sat May 28, 2011 8:48 pm
Location: Acton, MA

Re: Palmer has open lapping 6/3

Post by n1gzd » Wed May 18, 2016 11:31 am

is the shower house open (and I assume that real toilets are in that building as well)?
Is the area around the garages paved yet (it was very muddy when I was there for rainy event).
Are the car ports in use now (lower area open roofed area)? Do they charge extra to use them?

see you there.
Rebecca

User avatar
breakaway500
Speed Racer
Speed Racer
Posts: 2663
Joined: Wed Aug 29, 2007 8:47 am
Location: In my shop,usually.

Re: Palmer has open lapping 6/3

Post by breakaway500 » Wed May 18, 2016 12:38 pm

Water is on..they are anxiously waiting for the state to OK the permit for use. (any day now is what I was told) The grading was all done around the garages last time I was there,but no hot top yet.It may have been done this week. Car ports? Hmm..not sure where those are. There is a covered pavilion area right at the start/finish line now,but it's not for car use. If I go Friday,I'll update. Fred or Chris may chime in as well. Wish I was there today... :wink:
It's not what you drive, it's how you drive. "Lap times matter"

n1gzd
Speed Racer
Speed Racer
Posts: 483
Joined: Sat May 28, 2011 8:48 pm
Location: Acton, MA

Re: Palmer has open lapping 6/3

Post by n1gzd » Wed May 18, 2016 4:21 pm

when I was there two weeks ago they framed up some car ports for race cars to park under in the lower parking lot. I do not know if they will charge to use them. just a roof with no walls. looks like you can enter from the back and drive out the front. when I was there they said that it was day 29 for showerhouse approval and that after 30 days they can use it with defacto approval (no news is good news).

User avatar
breakaway500
Speed Racer
Speed Racer
Posts: 2663
Joined: Wed Aug 29, 2007 8:47 am
Location: In my shop,usually.

Re: Palmer has open lapping 6/3

Post by breakaway500 » Fri May 20, 2016 8:19 pm

Rebecca,you are correct. The "pavilion area" at the start/finish line is a carport, although not fully finished, and looks like the area under it may be paved when completed. The showers/bathrooms are still not functional due to the State dragging their feet on the letter of approval. The garage area is not paved as of today.

Great fun today with all flag stations occupied and a good bunch of attendants. Fred even cooked lunch! Can't wait to get back there again..once or twice a week would be just about ideal.. :D :sunny: :sunny:
It's not what you drive, it's how you drive. "Lap times matter"

User avatar
breakaway500
Speed Racer
Speed Racer
Posts: 2663
Joined: Wed Aug 29, 2007 8:47 am
Location: In my shop,usually.

Re: Palmer has open lapping 6/3

Post by breakaway500 » Mon May 23, 2016 5:30 pm

Carport area by start/finish will have concrete floors.I believe a stall will be $30/day rental. Garage will be paved this wednesday (5/25) Water/showers/etc very very soon…
It's not what you drive, it's how you drive. "Lap times matter"

SandyClam
Fast Lapper
Fast Lapper
Posts: 49
Joined: Mon Sep 07, 2015 8:16 pm

Re: Palmer has open lapping 6/3

Post by SandyClam » Tue May 31, 2016 11:55 am

Do you have to register for these or can we just show up and pay when we get there?

User avatar
breakaway500
Speed Racer
Speed Racer
Posts: 2663
Joined: Wed Aug 29, 2007 8:47 am
Location: In my shop,usually.

Re: Palmer has open lapping 6/3

Post by breakaway500 » Tue May 31, 2016 3:12 pm

They like you to register but won't turn you away if you show up and pay.. :wink:
It's not what you drive, it's how you drive. "Lap times matter"

Mark Swinehart
Speed Racer
Speed Racer
Posts: 911
Joined: Wed Oct 23, 2002 2:31 pm

Re: Palmer has open lapping 6/3

Post by Mark Swinehart » Tue May 31, 2016 7:41 pm

The track is going to pour concrete this Thursday so we will not have access to the car ports this weekend.

offcamber09
Speed Racer
Speed Racer
Posts: 1014
Joined: Wed Jun 01, 2005 6:44 pm
Location: East Kingston, NH
Contact:

Re: Palmer has open lapping 6/3

Post by offcamber09 » Tue May 31, 2016 9:55 pm

Fred said there were like 2 cars signed up for Friday. Looks like rain- though.
Scott Rosnick
#09 BMW 318ti-6

n1gzd
Speed Racer
Speed Racer
Posts: 483
Joined: Sat May 28, 2011 8:48 pm
Location: Acton, MA

Re: Palmer has open lapping 6/3

Post by n1gzd » Wed Jun 01, 2016 4:30 pm

I signed up but expect to cancel. I have had enough wet track lately. Rebecca

User avatar
brucesallen
Speed Racer
Speed Racer
Posts: 1468
Joined: Tue May 06, 2003 9:56 am
Location: NH
Contact:

Re: Palmer has open lapping 6/3

Post by brucesallen » Thu Jun 02, 2016 8:40 pm

I am camped on paddock now. Just grilled a tenderloin. No one else here. Garages open and paved. Carport concrete poured today. Not ready until Monday. Big bathroom and shower still not open.
Bruce Allen
The Greased Shadow
"It's all about the fast lap"

jeffw
Moderator
Moderator
Posts: 916
Joined: Wed Oct 18, 2006 12:51 am
Location: Wilmington, MA

Re: Palmer has open lapping 6/3

Post by jeffw » Thu Jun 02, 2016 9:31 pm

Looking dry for tomorrow.
Jeff Wasilko
On the Track: 1995 Miata #08
To the Track: 2007 Volvo 780
On the Street: 2017 Volvo V60 Polestar

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 1 guest