Local mechanic to central MA

General chat that fellow COM'ers may be interested in.
Post Reply
ryanthieme
Rookie Racer
Rookie Racer
Posts: 56
Joined: Sat Oct 08, 2005 7:51 pm
Location: Somewhere in MA

Local mechanic to central MA

Post by ryanthieme » Mon Aug 06, 2007 5:33 pm

My mother is looking for a local mechanic to do brake work on her Lexus RX300. The dealership quoted her ~$500 which seems like a lot to do pads and rotors, though I haven't done any research to back this up.

She's located in Upton, so anything in central mass would be good.

~ryan
Ryan Thieme
#334 ST3 Miata

User avatar
mossaidis
Speed Racer
Speed Racer
Posts: 352
Joined: Tue Aug 02, 2005 11:53 pm
Location: Milan, Italy

Post by mossaidis » Mon Aug 06, 2007 5:51 pm

try Chang in

20R Main St.
Maynard, MA
01754
(978) 897-6649

User avatar
rajito
Speed Racer
Speed Racer
Posts: 595
Joined: Thu Dec 18, 2003 11:33 pm

Post by rajito » Mon Aug 06, 2007 6:14 pm

If they're doing all four, it seems like a reasonable rate. I think the pads and rotors themselves will cost around 300-350 for all four.

Raj

eastcoastbumps
Speed Racer
Speed Racer
Posts: 391
Joined: Mon Jul 31, 2006 10:41 am
Location: Central MA

Post by eastcoastbumps » Mon Aug 06, 2007 9:21 pm

rajito wrote:If they're doing all four, it seems like a reasonable rate. I think the pads and rotors themselves will cost around 300-350 for all four.

Raj
Not at a dealership. Its probably about $100-130 per rotor and another $80 or so for pads. So ~$300 for parts and 1.5-2.0 hours of labor @ ~$100/hr puts you right near $500 for just one axle. It was $98.95/hr when I worked at Lexus two years ago, so I'm sure they're up to $104-$109 by now.

You could probably find a small garage right in Upton to do it for around $300 parts and all. Or you could do her a favor and do it for her with $150 in parts from NAPA.
Pete McParland #617
Honda S2000

ryanthieme
Rookie Racer
Rookie Racer
Posts: 56
Joined: Sat Oct 08, 2005 7:51 pm
Location: Somewhere in MA

Post by ryanthieme » Tue Aug 07, 2007 9:50 am

eastcoastbumps wrote:
rajito wrote:If they're doing all four, it seems like a reasonable rate. I think the pads and rotors themselves will cost around 300-350 for all four.

Raj
Not at a dealership. Its probably about $100-130 per rotor and another $80 or so for pads. So ~$300 for parts and 1.5-2.0 hours of labor @ ~$100/hr puts you right near $500 for just one axle. It was $98.95/hr when I worked at Lexus two years ago, so I'm sure they're up to $104-$109 by now.

You could probably find a small garage right in Upton to do it for around $300 parts and all. Or you could do her a favor and do it for her with $150 in parts from NAPA.
Unfortunately, time is something of the essence and all my free time is tied up getting ready for my wedding in a couple weeks. All the last minute appointments and errands we have to run on the weekend means I can't do the job for her. I'm also not very close to their house to do it after work.

I'll pass along Chang as a possibility.

Thanks.

~ryan
Ryan Thieme
#334 ST3 Miata

User avatar
mossaidis
Speed Racer
Speed Racer
Posts: 352
Joined: Tue Aug 02, 2005 11:53 pm
Location: Milan, Italy

Post by mossaidis » Tue Aug 07, 2007 10:05 am

mossaidis wrote:try Chang in

20R Main St.
Maynard, MA
01754
(978) 897-6649
Many know Chang, he runs on almost every NER autoX and every NE ProSolo and National autoXs. I have never heard of a complaint regarding his mechanic skills or prices.

jimmacsrx7
Speed Setter
Speed Setter
Posts: 102
Joined: Wed Oct 26, 2005 6:47 pm
Location: Upton MA

car repair

Post by jimmacsrx7 » Tue Aug 07, 2007 11:46 am

Hello,
You can call Tim at Upton Foreign Motors--- 508-529-4040. Feel free to use my name. Good luck.
Jim McNamara

ryanthieme
Rookie Racer
Rookie Racer
Posts: 56
Joined: Sat Oct 08, 2005 7:51 pm
Location: Somewhere in MA

Re: car repair

Post by ryanthieme » Tue Aug 07, 2007 11:53 am

jimmacsrx7 wrote:Hello,
You can call Tim at Upton Foreign Motors--- 508-529-4040. Feel free to use my name. Good luck.
Jim McNamara
Thanks Jim. I passed the info along to my mother.

~ryan
Ryan Thieme
#334 ST3 Miata

Post Reply

Who is online

Users browsing this forum: Semrush [Bot] and 1 guest